Polymaker PolyMide™ CoPa Filament
PolyMide™ is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing.
PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.
PolyMide™ CoPA features Polymaker's Warp-Free™ technology:
Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.
Printing Properties
Nozzle Temperature:
250˚C – 270˚C
Printing Speed:
30mm/s – 50mm/s
Bed Temperature:
25˚C – 50˚C
Bed Surface:
Glass with glue
Cooling Fan:
OFF
Printing conditions may vary with different printers and nozzle diameters
Mechanical Properties:
Young’s Modulus:
2223 ± 199 Mpa
Tensile Strength:
66.2 ± 0.9 Mpa
Bending Strength:
97.0 ± 1.1 Mpa
Charpy Impact Strength:
9.6 ± 1.4 kJ/m2
Thermal Properties:
Glass Transition Temperature:
67˚C
Vicat Softening Temperature:
180˚C
Melting Temperature:
190˚C
Notes:
Drying Settings:
80˚C for 12h
Recommended Support Materials:
PolyDissolve™ S1
Other:
It is highly recommended to use the PolyBox™ when printing with PolyMide™ CoPA and to store it in the resealable bag.
To ensure a good heat resistance of your printed part it is recommended to anneal your PolyMide™ CoPA 3d printed model.
Annealing settings: 70˚C for 2h
When used extensively, PolyMide CoPA can be abrasive to brass nozzles. When using PolyMide CoPA, we recommend to switch to a wear resistant nozzle such as hardened steel nozzle.