Roll over image to zoom in
PolyFlex™ TPU95-HF
₱1,699.00
HF stands for High flow and this flexible filament has a melt index higher than some PLA filaments. This means it can be printed faster than all other flexible filaments and all printing characteristics, such as, retraction and overhangs are improved. Created from Covestro’s Addigy® family, TPU95-HF combines with its UV resistance, flexibility and high-speed printing.
Recommended Printing Conditions
Direct Drive:
Indirect Drive
Drying Settings: 70˚C for 8h
(Only if the material has absorbed moisture)
Additional information
| Material type | TPU (Thermoplastic Polyurethane) |
|---|---|
| Shore Hardness | 95A |
| Filament Diameter | 1.75 mm / 2.85 mm |
| Typical Spool Weight | 750 g |
| Printing Temperature | 200˚C – 220˚C |
| Bed Temperature | 25˚C – 50˚C |
| Printing Speed | 40mm/s – 100mm/s |
| Fan | ON |
| Direct Drive Retraction Distance | 3mm |
| Direct Drive Retraction Speed | 40mm/s |
| Indirect Drive Retraction Distance | 6mm |
| Indirect Drive Retraction Speed | 60mm/s |
| Drying Settings | 70˚C for 8h |
