Bambu Lab A1 Mini 3D Printer Philippines
Key Features
- Full-auto Calibration.
- Under 48 dB Low Noise in Silent Mode.
- Full-metal Linear Rails and Bearings.
- Vibration and Flow Rate Compensation.
Original price was: ₱16,999.00.₱14,149.00Current price is: ₱14,149.00.
Bambu Lab A1 Mini 3D Printer Philippines
Key Features
- Full-auto Calibration.
- Under 48 dB Low Noise in Silent Mode.
- Full-metal Linear Rails and Bearings.
- Vibration and Flow Rate Compensation.
Original price was: ₱16,999.00.₱14,149.00Current price is: ₱14,149.00.
Bambu Lab A1 mini
- Plug-N-Play
- Active Flow Rate Compensation
- Full Auto Calibration
- Active Motor Noise Cancelling
- High Speed Precision
Active Flow Rate Compensation
The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
Active Motor Noise Cancelling
The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed And Quality（High-Speed Precision)
Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
A1 mini Tech Specs
| Item | Specifications | ||
|---|---|---|---|
| Body | Build Volume (W x D x H) | 180×180×180 mm³ | |
| Toolhead | Hot End | All-Metal | |
| Toolhead | Max Hot End Temperature | 300 °C | |
| Toolhead | Nozzle | Stainless Steel | |
| Toolhead | Nozzle Diameter | 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm | |
| Heatbed | Build Plate | Bambu Textured PEI Plate (Included) Bambu Smooth PEI Plate | |
| Heatbed | Max Build Plate Temperature | 80°C | |
| Speed | Max Speed of Toolhead | 500mm/s | |
| Speed | Max Acceleration of Toolhead | 10000mm/s² | |
| Supported Filament | IDEAL | PLA, PETG, TPU, PVA | |
| Supported Filament | NOT RECOMMENDED | ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer | |
| Sensors | Monitoring Camera | Low Frame Rate Camera (Up to 1080P) Timelapse Supported | |
| Sensors | Filament Run Out Sensor | YES | |
| Sensors | Filament Odometry | YES | |
| Sensors | Power Loss Recover | YES | |
| Sensors | Filament Tangle Sensor | YES | |
| Physical Dimensions | A1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg | ||
Other 3D Printers by Bambu Lab
Bambu Lab A1 3D Printer Philippines
Original price was: ₱34,995.00.₱21,995.00Current price is: ₱21,995.00.
Bambu Lab A1 Combo 3D Printer Philippines
Original price was: ₱42,995.00.₱32,995.00Current price is: ₱32,995.00.
Bambu Lab A1 Mini Combo 3D Printer Philippines
Original price was: ₱26,999.00.₱23,995.00Current price is: ₱23,995.00.
Bambu Lab P1S Combo 3D Printer Philippines
Original price was: ₱66,995.00.₱53,499.00Current price is: ₱53,499.00.
Bambu Lab P1S 3D Printer Philippines
Original price was: ₱49,995.00.₱38,995.00Current price is: ₱38,995.00.
Bambu Lab P1P 3D Printer Philippines
Original price was: ₱42,995.00.₱32,995.00Current price is: ₱32,995.00.
Filaments
Bambu Lab ABS-GF (Glass Fiber Reinforced ABS) 3D Printer Filament 1.75mm
Original price was: ₱3,940.00.₱1,649.00Current price is: ₱1,649.00.
