Roll over image to zoom in
Bambu Lab PET- CF
Price range: ₱1,349.00 through ₱2,249.00
Product Features
- Very Low Moisture Absorption
- Exceptional Mechanical Properties
- High Dimensional Stability
- Exceptional Thermal Resistance
- Comes with High Temperature Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- 0.2 mm Nozzle NOT Compatible
- Stainless Steel Nozzle NOT Recommended
- All AMS Series NOT Compatible
- Dry before Use for the Highest Print Quality
Bambu Lab PET- CF
Bambu PET-CF is a blend of tough PET and carbon fiber. Carbon fiber improves hardness and mechanical strength, while still help maintain the low warping and shrinkage of ordinary PET. Bambu PET-CF has excellent high temperature resistance and a soft glow appearance. Its excellent strength, heat resistance, dimensional stability and low moisture absorption make Bambu PET-CF an ideal choice for load-bearing structures or prints used in high temperature and humid environments.
Low moisture absorption
In saturated water absorption conditions, the strength and stiffness of PET-CF have small losses, making it suitable for prints used in high humidity environments.
Normal PA-CF
Loading Weight: 1 kg
Bambu PET-CF
Loading Weight: 1 kg
The test models have a span of 220 mm and a thickness of 3 mm in unloaded state.
High dimensional stability
Due to the creep and warping resistance of PET-CF, prints can achieve excellent matching accuracy.
Specimens size (L*W*H): 240*8*15 mm³
Infill density: 60%
Exceptional thermal resistance
• Specimen size (L*W*H): 95*10*4 mm³
• Test conditions: Specimens were put in an oven at 70 °C and 150 °C respectively for 0.5 hour.
• As a crystalline material, PLA will significantly deform only after the temperature exceeds its melting point (around 155°C).
Printing setup
0.6 mm Hardened Steel Nozzle (Recommended)
0.4 mm / 0.8 mm Hardened Steel Nozzle (Capable)
Enclosed printer (Recommended)
Open frame printer (Capable)*
AMS NOT compatible
*Layer bonding of some prints may become low due to overcooling.
Additional information
| Diameter | 1.75 mm |
|---|---|
| Net Filament Weight | 0.5 kg, 1 kg |
| Spool Material | PC + ABS (Temperature resistance 90 °C) |
| Spool Size | Diameter: 200 mm; Height: 67 mm |
| Drying Settings before Printing | Blast Drying Oven: 80 °C, 8 – 12 h |
| Printing and Storage Humidity | < 20% RH (Sealed with desiccant) |
| Bed Type | Engineering Plate, High Temperature Plate or |
| Nozzle Size | 0.4, 0.6 (recommended), 0.8 mm |
| Nozzle Temperature | 260 – 290 °C |
| Bed Surface Preparation | Glue |
| Bed Temperature | 80 – 100 °C |
| Cooling Fan | 0 – 60% |
| Printing Speed | < 100 mm/s |
| Retraction Length | 0.8 – 1.4 mm |
| Retraction Speed | 20 – 40 mm/s |
| Chamber Temperature | 45 – 60 °C |
| Max Overhang Angle | ~ 70 ° |
| Max Bridging Length | ~ 30 mm |
| Support Material | Support for PA/PET |
