Roll over image to zoom in
Fiberon™ PA6-CF20 (Formerly PolyMide™ PA6-CF)
Price range: ₱2,199.00 through ₱6,899.00
Fiberon™ PA6-CF20 is a carbon fiber reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion.
Fiberon™ PA6-CF20 is the same great formula as PolyMide PA6-CF, although Fiberon™ PA6-CF20 may print in a slightly darker black shade color than its predecessor.
Recommended Printing Conditions
Direct Drive:
Indirect Drive
Drying Settings: 100˚C for 8h
(Only if the material has absorbed moisture)
Annealing: 80˚C for 6h
Note:
- Abrasion of the brass nozzle happens frequently when printing PolyMide™ PA6-CF. Normally, the life of a brass nozzle would be approximately 9h. A wear-resistance nozzle, such as hardened steel and ruby nozzle, is highly recommended to be used with PolyMide™ PA6-CF.
- PolyMide™ PA6-CF is sensitive to moisture and should always be stored and used under dry conditions (relative humidity below 20%).
- If PolyMide™ PA6-CF is used as the support material for itself, please remove the support structure before excessive moisture absorption. Otherwise the support structure can be permanently bonded to the model.
- After the printing process, it is recommended to anneal the model in the oven at 80 – 100°C for 6 hours.
Additional information
| Material type | Polyamide (Nylon) |
|---|---|
| Filament Diameter | 1.75 mm / 2.85 mm |
| Typical Spool Weight | 0.5 Kg / 0.75 kg / 1 kg |
| Printing Temperature | 280˚C – 300˚C |
| Build Plate Temperature | 40˚C – 50˚C |
| Chamber Temperature | Room Temperature |
| Printing Speed | up to 300mm/s |
| Cooling Fan | OFF |
| Direct Drive Retraction Distance | 3mm |
| Direct Drive Retraction Speed | 40mm/s |
| Indirect Drive Retraction Distance | 6mm |
| Indirect Drive Retraction Speed | 60mm/s |
| Regular Oven | 100˚C for 10h |
| PolyDryer | Level 3 for 18h (PolyDryer™) |
| Annealing Settings | 100˚C for 16h |
