Roll over image to zoom in
Magigoo PC
₱1,650.00
The strength and toughness of PC make it an ideal FDM material for the production of functional prototypes as well as end use part, nonetheless the material does present some printing challenges. Virgin PC has a high glass transition temperature (Tg) and thus can be used in high temperature applications. However, having a high Tg can make it very difficult to print using desktop printers, as these are usually not equipped to cater for the high printing temperatures required to print virgin PC. Virgin PC in fact tends to warp considerably when printed at an insufficient bed temperature (<130 ºC), in non-heated enclosed chambers without the use of an appropriate bed adhesive.
Magigoo Pro PC can be used on glass or a multitude of other surfaces. Use on other plastic based surfaces, including sheets is recommended to provide strong adhesion and preventing the part from fusing to the sheet.
Get a single pen. We are sure you will be back for more … it is that good.
Tips for Printing with ASA Filament:
- While Magigoo Original is usually recommended for PLA and ABS, some ASA materials tend to work better with Magigoo Pro PC.
- Enclosure. It’s recommended with some materials and some prints would be also OK without it.
- Print your first layer slowly, around 20mm/s
- Re-apply Magigoo before each print. It’s cheaper than dealing with a failed print later
Additional information
| Features | Adhesive stick |
|---|
