Roll over image to zoom in
PolyLite LW-PLA
₱1,799.00
PolyLite™ LW-PLA: Ultra-Lightweight Prints, Consistent Performance
Innovative Pre-Foamed Technology
Discover PolyLite™ LW-PLA - a pre-foamed PLA filament designed for projects where weight matters most. Unlike active foaming filaments, PolyLite™ LW-PLA is foamed during manufacturing, ensuring a consistently low density without the need to adjust extrusion temperatures.
Ideal Applications for Lightweight Models
Perfect for aerospace hobbyists and anyone looking to reduce model weight, PolyLite™ LW-PLA delivers strong, ultra-light prints with impressive detail.
Printing Tips for Optimal Results
To achieve the best print quality, review our recommended print settings before you begin. Note that LW-PLA can be prone to stringing, so fine-tuning your retraction and temperature settings is key.
Lightweight Strength You Can Trust
Achieve lightweight strength and reliability with PolyLite™ LW-PLA - your go-to filament for specialized, weight-sensitive applications.
Printing Requirements
None! Will print great on any stock FDM 3D printer without any upgrades required.
If using a stock, older style printer - we would recommend printing slower.
Additional information
| Material type | Lightweight PLA (foamed PLA) |
|---|---|
| Filament Diameter | 1.75 mm |
| Typical Spool Weight | ~500 g – 800 g |
| Density | ~0.8 g/cm³ (significantly lower than standard PLA) |
| Surface Finish | Matte |
| Weight Reduction | ~30–50% lighter than standard PLA prints |
| Printing Temperature | 190˚C – 210˚C |
| Bed Temperature | 30˚C – 50˚C |
| Printing Speed | 25mm/s – 60mm/s |
| Fan | ON |
| Direct Drive Retraction Distance | 3mm |
| Direct Drive Retraction Speed | 40mm/s |
| Indirect Drive Retraction Distance | 6mm |
| Indirect Drive Retraction Speed | 60mm/s |
| Drying Settings | 55˚C for 6h |
