Polymaker™ HT-PLA-GF
₱1,049.00
Built for serious performance
Polymaker™ HT-PLA-GF combines high-temperature stability with enhanced strength and durability. Withstands up to 150°C without sagging or losing form. When annealed it can be perfect for functional parts that need to endure the heat.
Reinforced with Glass Fiber
Tougher. Stronger. Smarter. HT-PLA-GF is glass fiber-reinforced, delivering higher stiffness and durability for demanding applications.
Note: This material is abrasive—use a hardened steel or ruby nozzle for best results.
Need Extra Heat Deflection?
Anneal at 80–100°C for 30 minutes (we recommend 100°C) for an even higher HDT.
Printing Recommendations
Polymaker HT-PLA-GF
The above are printing recommendations, please note that it can vary depending on your 3D printer setup. Make sure to increase your temperature for high speed 3D printers in order to use higher printing speed.
Additional information
| Material type | Glass-fiber reinforced high-temperature PLA |
|---|---|
| Filament diameter | 1.75 mm |
| Net weight | 1 kg spool |
| Density | ~1.337 g/cm³ |
| Printing Temperature | 210˚C – 230˚C |
| Bed Temperature | 25˚C – 60˚C |
| Printing Speed | up to 300mm/s |
| Fan | ON |
| Retraction Distance | 1-3mm |
| Retraction Speed | 20-40mm/s |
| Drying Settings | 60˚C for 6h |
