Roll over image to zoom in
Bambu Lab A1 Mini
Price range: ₱13,499.00 through ₱22,999.00
Product Features
- Full-Auto Calibration: Absolutely no manual tuning.
- Seamless Multi-Color Printing (Combo Version): Experience limitless creativity with AMS-powered material handling.
- 49dB Whisper-Quiet Operation: Print in peace with a noise level as low as a quiet library.
- Best-In-Class Print Quality: Pro-grade precision & surfaces that set the industry standard.
- One-Click MakerWorld Integration: Find your next project and start printing instantly.
- Compact Footprint: Blends in to your desk setup.
* To connect the A1 mini printer to the AMS/ AMS 2 Pro/ AMS HT, an AMS HUB (SA013) accessory is needed.
* Cybersecurity compliant with EU RED Article 3.3(d)(e) and ETSI EN 303 645 V2.1.1:2020.
Active Flow Rate Compensation
The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
Active Motor Noise Cancelling
The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed
And Quality（High-Speed
Precision）
Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers,
powerful MCU, and above all, an advanced motion control system that
utilizes these features to print a 14-minute benchy with quality and
following all the speed benchy rules straight out of the box without
using specialized filaments.
Sync with Bambu Studio and
Bambu Handy
Remote control and monitor your printer on Bambu Studio or Bambu
Handy. Through the built-in camera, you can also record timelapse
videos.
Additional information
| Build Volume(W*D*H) | 180*180*180 mm³ |
|---|---|
| Hot End | All-Metal |
| Nozzle | Stainless Steel |
| Max Hot End Temperature | 300 °C |
| Nozzle Diameter | 0.4 mm (Included) |
| Build Plate | Bambu Textured PEI Plate (Included) |
| Max Build Plate Temperature | 80°C |
| Max Speed of Tool Head | 500mm/s |
| Max Acceleration of Tool Head | 10000mm/s² |
| PLA, PETG, TPU, PVA | Ideal |
| ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer | Not Recommended |
| Monitoring Camera | Low Framerate Camera (Up to 1080P) |
| Filament Run Out Sensor | Yes |
| Filament Odometry | Yes |
| Power Loss Recover | Yes |
| Filament Tangle Sensor | Yes |
| Physical Dimensions | A1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg |
