Roll over image to zoom in
Bambu Lab PVA
₱1,749.00
Product Features
- Easily dissolved in water
- Smooth support interface
- Recommended for all PLA
- Comes with High Temperature Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- ONLY used for support
- Not to be used for standalone models
- All AMS Series Compatible
- 0.2 mm Nozzle NOT Compatible
- Dry Out Before Use
* Note: Before printing, please kindly refer to the Printing Tips for optimal results.
Bambu Lab PVA
Bambu PVA is a water-dissolvable support material. It provides reliable support for complex designs and overhangs, which can be easily dissolved in water after printing. Compatible with various filaments, it simplifies post-processing and reduces the risk of damaging the printed object during support removal.
Soak and Dissolve for Supporting Intricate Details
Bambu PVA possesses the ability to dissolve in water, penetrating deep into the intricacies to provide support where regular supports fall short. With Bambu PVA you can design and print models that were previously impossible.
Seamless Support Interface Surface
Water-soluble support material can accommodate zero top interface spacing, guaranteeing a seamless bond with the print surface, resulting in precise and smooth support contact surfaces for your prints.
Thorough and Clean Dissolution
Bambu PVA utilizes a high-quality formula that dissolves easily and thoroughly in water, effortlessly removing support material and eliminating the hassle of manual cleaning.
Additional information
| Diameter | 1.75 mm |
|---|---|
| Net Filament Weight | 0.5 kg |
| Spool Material | PC+ABS (Temperature resistance 90 °C) |
| Spool Size | Diameter: 200 mm; Height: 67 mm |
| Drying Settings before Printing | Blast Drying Oven: 80 °C, 8 – 12 h |
| Printing and Storage Humidity | < 20% RH (Sealed, with desiccant) |
| Nozzle Size | 0.2, 0.4, 0.6, 0.8 mm |
| Nozzle Temperature | 220 – 250 °C |
| Bed Type | Cool Plate, High Temperature Plate or |
| Bed Surface Preparation | Glue |
| Bed Temperature | 35 – 45°C |
| Cooling Fan | Turn on |
| Printing Speed | < 200 mm/s |
| Retraction Length | 0.6 – 1.0 mm |
| Retraction Speed | 20 – 40 mm/s |
| Chamber Temperature | 25 – 45 °C |
| Max Overhang Angle | 55 ° |
| Max Bridging Length | ~ 30 mm |
| Support Material | / |
