Name: Phrozen RPG Resin
Brand: Phrozen
SKU: 17620
Availability: InStock

High-flex, impact-resistant formula. Notched Izod Impact 56.2 J/m, stops swords, horns, and wings from snapping on impact
8K-level detail with 0.08 mm ultra-fine support tips, less cleanup, fewer surface marks
Endorsed by Lychee Slicer, pre-tuned profiles available for all major Phrozen machines
35.5% elongation formula models bend without breaking under tabletop handling

Precautions

Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
After printing, please keep used resins in a closed & opaque bottle.
Avoid mixing used resin with new resin.
Keep resin away from kids and away from direct sunlight exposure.
Wear gloves and masks when using resins.
If this chemical contacts the skin or eye, wash with plenty of water.DO NOT dump resin.
Please cure it and treat it as general plastic garbage.

Additional information

Liquid Viscosity	25C: 280 to 350 cps
Liquid Density	1.13 g/cm3
Surface Hardness	75 to 78 Shore D
Tensile Modulus	725.1 to 1152.3 MPa
Ultimate Tensile Strength	16.5 to 24.2 MPa
Elongation at Break	25.3 to 35.5 percent
Notched Izod Impact Strength	56.2 to 80.8 J/m
Heat Deflection Temperature HDT at 0.45 MPa	48.9 to 56.6C
Minimum Support Tip Diameter	0.08 mm
UV Light Spectrum Compatibility	Optimized for 405nm light sources