Roll over image to zoom in
Phrozen W40 Resin
₱7,970.00
- Contain 40% wax content.
- Reliable for medium to large pieces casting.
- Great for thick jewelry and championship rings.
- Clean burnout.
- Zero ash content.
Precautions
- Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
- After printing, please keep used resins in a closed & opaque bottle.
- Avoid mixing used resin with new resin.
- Keep resin away from kids and away from direct sunlight exposure.
- Wear gloves and masks when using resins.
- If this chemical contacts the skin or eye, wash with plenty of water.DO NOT dump resin.
- Please cure it and treat it as general plastic garbage.
Additional information
| Liquid Viscosity | 25C: 500 to 550 cP |
|---|---|
| Liquid Density | 1.05 g/cm3 |
| Wax Content | 40 percent |
| Ash Content | 0.0 to 0.1 percent ASTM E1131 TGA Verified Clean Burnout |
| Surface Hardness | 60 Shore D |
| Recommended Layer Height | 50 um |
| XY Resolution Capability | 0.050 mm |
| UV Wavelength Compatibility | Optimized for 405nm light sources |
Reviews
There are no reviews yet.