Roll over image to zoom in
Phrozen Wash & Cure KIT
₱32,500.00
Wash & Cure Kit
Make your post-processing more efficient with a huge Washing Station and a Curing Station. Let us show you how in just a few steps!
STEP 1: WASH
Put your uncured model into the 8L washing station.
STEP 2: DRY
Transfer it to the curing station and start the air drying mode.
STEP 3: CURE
Keep the model inside and turn on the curing mode.
STEP 4: COMPLETE
Take out your awesome model then all done!
A Complete Wash, Dry, and Cure Solution For Large Prints
Dunk 10" Wide Building
Plates Straight In
With extra-large build volume, you can clean almost any model, no matter how big! Best used with Sonic Mighty 16K and other 10” building plates.
Clean Delicately With
Powerful Vortex
Equipped with a powerful bottom propeller, Phrozen Washing Station effectively cleans your models without causing damage to details.
The Dual Fan System
Makes Drying Easier Than
Ever
Designed with a fan drying mode, you can pop printed models straight into the Phrozen Curing Station to dry and cure in one go.
No More Soft, Sticky, and
Unevenly Cured Models
With 405nm UV lights radiating from the back and under the models, Phrozen Curing Station ensures extra effective curing.
Additional information
| Machine Dimensions | 27.7 x 20.7 x 46.7 cm |
|---|---|
| Max Model Size | 21.8 x 12.3 x 23.5 cm |
| Capacity | 8L Bucket |
| Timer Range | 0 – 30 minutes |
| Rated Power | 48W |
| Input Voltage | 24 VDC |
| Net Weight | 3.5 kg |
| Operational Mode | Powerful Vortex Wash |
Reviews
There are no reviews yet.