Roll over image to zoom in
Ultimaker PVA removal Station
₱77,910.00
Dissolve 3D printed PVA up to 4x faster.
Make printing complex designs faster and easier. The UltiMaker PVA Removal Station dissolves support material
Dissolve 3D printed PVA up to 4x faster.
Make printing complex designs faster and easier. The UltiMaker PVA Removal Station dissolves support material quickly and effectively, keeping operator time to a minimum and increasing productivity.
Less time waiting for parts
High-speed water circulation driven by a magnetic rotor removes PVA much faster than motionless water – even from hard-to-reach cavities. So you have your parts post-processed and ready to use as soon as possible.
Reduce operator time up to 80%
The PVA Removal Station requires only a few minutes of operator time per print, and almost zero maintenance. Just press the start button. Leave it to spin. And collect your print when it’s ready.
Key Features
Rotor-powered water circulation: Choose 100 or 225 RPM circulation depending on the fragility of your part. Every two minutes, the rotor changes direction to push water evenly against the model.
Prints stay safe and submerged: A rinsing basket keeps your print in place and completely submerged while dissolving, then lifts up for mess-free draining and print removal.
Easy to monitor progress: A transparent, illuminated container lets you easily follow the PVA removal process and see when your part is ready. Plus, a saturation indicator shows when to refresh the water.
Additional information
| Container Volume | 13.7 liters (3.6 US gal) |
|---|---|
| Maximum Part Size | W 200 x D 230 x H 165 mm |
| Supported Materials | Optimized for: PLA and PVA |
| Supported Solvents | Water |
| Rotor Speed | 225 RPM (normal) |
| Operating Sound | < 50 dBA |
| Dimensions | W 303 x D 325 x H 374 mm |
| Voltage | 100 – 240 V AC |
| Frequency | 50 – 60 Hz |
| Power | 38 W |
