-
Bambu Lab AMS HT
Product Features
- Active Air Vent 85°C Filament Drying
- Air-tight Filament Storage
- Up to 24-color/Multi-material Printing
- Brushless Servo Feeding Motor
- RFID Filament Sync
- Important notice
The AMS requires specific accessory configurations for various Bambu Lab 3D printers. All accessories mentioned in the description need to be purchased separately.
* Please note the product is the same among all variants, and the only difference is recommended accessories. You may place an order from any variant in stock.
₱10,999.00Bambu Lab AMS HT
₱10,999.00 -
-
-
Bambu Lab Automated Material System
Product Features
- Multi-Colors/materials Capability
- Keep Filament Dry
- Filament Runout & Winding Detection
- AMS Filament Backup
- The AMS is compatible with P2 series printers with extra accessories needed.
Please make sure to select corresponding accessories in the add-on section according to your use case.
* Important notice: The AMS requires specific accessory configurations for various Bambu Lab 3D printers.All accessories mentioned in the description need to be purchased separately.
* Please note the product is the same among all variants, and the only difference is recommended accessories. You may place an order from any variant in stock.
₱17,499.00Bambu Lab Automated Material System
₱17,499.00 -
Bambu Lab PPS-CF
Product Features
- Ultra-High Heat Resistance
- Top-tier Flame Retardancy
- Peerless Mechanical Properties
- Solvent and Chemical Resistance
- Ultra-Low Water Absorption
- Comes with Cardboard Spool
- Diameter: 1.75mm +/- 0.05mm
Cautions for Use
- For X1E/H2 Series Printing Only
- All AMS Series NOT Compatible
- 0.2 mm Nozzle NOT Compatible
- Stainless Steel Nozzle NOT Recommended
- Must Be Dried before Use to Achieve Optimal Print Quality
₱7,199.00 -
Bambu Lab PPA-CF
Product Features
- Metal-Like Strength
- Industrial-Grade Precision
- Stable Performance in Humid Conditions
- Unmatched Performance Under High Temperatures
- Compatible with a Wide Range of Printers
- Diameter: 1.75mm +/- 0.05mm
Cautions for Use
- All AMS Series NOT Compatible
- 0.2 mm Nozzle NOT Compatible
- Hardened Steel Nozzle Mandatory
- Must Be Dried before Use to Achieve Optimal Print Quality
₱4,899.00 -
Bambu Lab PA6-GF
Product Features
- Built to Last
- Dimensional Stability
- Exceptional Thermal Properties
- Chemical Resistance
- Smooth Surface and More Colors
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- AMS 2 Pro, AMS HT & AMS Compatible
- AMS lite NOT Compatible
- 0.2 mm Nozzle NOT Compatible
- Stainless Steel Nozzle NOT Recommended
- Dry Out Before Use
* Note: PA6-GF Yellow, Lime and Brown have been discontinued.
₱1,499.00 -
Bambu Support for PA/PET
Product Features
- Easy removal by hand
- Perfect support interface
- Recommended for PAHT-CF, PA6-CF, PET-CF, PA-GF, etc.
- Comes with High Temperature Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- ONLY used for support interface
- Not used for printing models alone
- AMS 2 Pro, AMS HT & AMS compatible
- AMS lite NOT compatible
- Dry out before use
- Enclosure Printers Required
* Note: Key settings such as interface layers, Z distance, and support structures can significantly affect print results. Always consult the Wiki before printing.
₱1,990.00Bambu Support for PA/PET
₱1,990.00 -
Bambu Support for ABS
Product Features
- Easy Support Removal
- Superior Support Interface Quality
- Comes with High Temperature Reusable Spool
- Diameter: 1.75mm +/- 0.05mm
Cautions for Use
- ONLY used for support
- Optional to Dry before Use
- Enclosure Printers Required
- AMS 2 Pro, AMS HT & AMS Compatible
- AMS lite NOT Compatible
₱649.00Bambu Support for ABS
₱649.00 -
Bambu Support for PLA/PETG
Product Features
- Easy & Tool-free Removal
- Smooth Support Interface
- Recommended for All PLA & PETG
- Transparent Appearance
- Comes with High Temperature Reusable Spool
- Diameter: 1.75mm +/- 0.05mm
Cautions for Use
- Only Used for Printing the Support Interface
- Avoid Printing Individual Models
- Recommended Drying before Use
- All AMS Series Compatible
* Note: Before printing, please kindly refer to the Printing Tips for optimal results.
₱1,249.00Bambu Support for PLA/PETG
₱1,249.00 -
Bambu Support for PLA
Product Features
- Effortless Removal
- Preserve Every Detail
- Affordable Choice
- Use for Support Interface
- Diameter: 1.75mm +/- 0.05mm
Cautions for Use
- Only Used for Printing the Support Interface
- Avoid Printing Individual Models
- All AMS Series Compatible
₱569.00Bambu Support for PLA
₱569.00 -
Bambu Lab PVA
Product Features
- Easily dissolved in water
- Smooth support interface
- Recommended for all PLA
- Comes with High Temperature Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- ONLY used for support
- Not to be used for standalone models
- All AMS Series Compatible
- 0.2 mm Nozzle NOT Compatible
- Dry Out Before Use
* Note: Before printing, please kindly refer to the Printing Tips for optimal results.
₱1,749.00Bambu Lab PVA
₱1,749.00
- Home
- About Us
- 3D Printer
- Filaments
- Accessories
- Parts
- More Tools
- Ador
- Ador w/ Printing Module
- Airdryer
- Beam Airfilter
- Beambox
- Beamo
- CNC Router
- CO2 Laser
- Consumables
- Diode Laser+ Optional Infrared/ UV Color Printing
- Dust Collector
- Fiber Laser
- Hexa
- Laser Cutter/Engraver
- License
- Machines
- Materials
- Medical Resin
- PCB Consumables
- Powder
- Resin
- Resin Printer
- Scanner
- Sheets
- SLS 3D Printer
- Software
- Spool-less Refillament
- Thermoforming
- Wax
- Wax Printer
- xTool Machines
- News & Update
- Contact
