Roll over image to zoom in
Polymaker™ PETG
₱749.00
Polymaker™ PETG – High-Speed, High-Strength, High-Quality Filament
New High Speed Formula
Engineered to print faster without losing strength or quality. Its high-flow formulation enables clean, accurate extrusion at speeds up to 300 mm/s, or over 500mm/s with high-flow nozzles while maintaining excellent layer adhesion, durability and surface finish.
Stronger, Smoother, and More Reliable
Designed for dependable performance, our new formula delivers superior inter-layer bonding, low warping, and a clog-free experience even during long prints. The result is strong, dimensionally stable parts with a professional appearance right off the bed.
Perfect for Prototypes & End-Use Parts
From gears, brackets, and fixtures to outdoor tools, sports accessories, and cosplay props, Polymaker PETG provides the perfect balance of toughness, flexibility, and aesthetic quality. Its chemical resistance and temperature tolerance (~70 °C HDT) make it ideal for both indoor and outdoor functional applications.
Easy to Print on Any Setup
Compatible with most FDM printers, Polymaker™ PETG prints smoothly without the need for an enclosure and works seamlessly with AMS and multi-material systems for reliable filament feeding and color swaps.
Warning
Polymaker PETG is very hygroscopic, keep your filament dry to prevent excessive stringing.
Note
Polylite PETG will be discontinued and replaced by the faster, stronger and easier to print successor, Polymaker PETG.
Printing Requirements
None! This will print great on any stock 3D printer!
Additional information
| Material type | PETG (Polyethylene Terephthalate Glycol) |
|---|---|
| Filament Diameter | 1.75 mm |
| Typical Spool Weight | 1 kg |
| Density | ~1.25 g/cm³ |
| Tensile Strength | ~50 MPa |
| Young’s Modulus | ~2100 MPa |
| Glass Transition Temperature | ~80 °C |
| Heat Deflection Temperature | ~74–78 °C |
| Printing Temperature | 240˚C – 260˚C |
| Bed Temperature | 60˚C – 70˚C |
| Printing Speed | up to 300mm/s |
| Fan | 20% – 60% |
| Direct Drive Retraction Distance | 1mm |
| Direct Drive Retraction Speed | 20mm/s |
| Indirect Drive Retraction Distance | 3mm |
| Indirect Drive Retraction Speed | 40mm/s |
| Drying Settings | 60˚C for 6h |
Reviews
There are no reviews yet.