Bambu Lab ABS-GF (Glass Fiber Reinforced ABS) 3D Printer Filament 1.75mm
Original price was: ₱3,940.00.₱1,649.00Current price is: ₱1,649.00.
Bambu Lab ABS-GF (Glass Fiber Reinforced ABS) 3D Printer Filament 1.75mm
Original price was: ₱3,940.00.₱1,649.00Current price is: ₱1,649.00.
Bambu ABS-GF
Bambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping. Glass fiber imparts a smooth matte finish with micro-spot gloss, blurring layer lines. ABS-GF is ideal for both mechanical parts and decorations due to the inherited water resistance, wear resistance, durability and vibrant colors.
Product Features
-
Enhanced Strength and Stiffness
-
Greater Dimensional Stability
-
Fine Matte Finish
-
Durability and Water Resistance
-
Comes with High Temperature Reusable Spool
-
Diameter: 1.75 mm +/- 0.03 mm
Cautions for Use
-
0.2 mm Nozzle Not Compatible
-
Enclosure Printers Required
-
AMS & AMS lite Compatible
-
Dry Out Before Use
Enhanced Strength and Stiffness
ABS-GF outclasses regular ABS in strength and stiffness, making it perfect for load-bearing and bending-resistance parts.
Greater Dimensional Stability
Glass fiber reinforcement gives ABS-GF better dimensional stability than regular ABS, minimizing warping and deformation during printing. This makes it ideal for intricate mechanical assembly parts or geometric components.
Specimen Test: Model size (L*W*H): 240*50*20 mm³ (the XY direction); Infill Density: 25%
Fine Matte Finish
PThe seamless matte finish, coupled with nearly invisible layer lines, gives ABS-GF a smooth appearance, making it ideal for decorative and fine-grained parts.
Water Resistance & Built to Last
PLA Matte Hex Code Table
| Color | Hex Code | Display | |
| IWhite |
|
||
| Gray |
|
||
| Yellow |
|
||
| Orange | #F48438 | ||
| Red |
|
||
| Green |
|
||
| Blue |
|
||
| Black |
|
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
Parameters Comparison
| ABS | ABS-GF | PA6-GF | |
| Composition | Acrylonitrile – butadiene – styrene | Acrylonitrile – butadiene – styrene, glass fiber | PA6, glass fiber |
| AMS Compatibility | YES | YES | YES |
| Dry Out Before Use | Recommended | Recommended | Required |
| Printing Speed | < 300 mm/s | < 180 mm/s | < 130 mm/s |
| Printer Type | Enclosure | Enclosure | Enclosure |
| Toughness (Impact Strength – XY) | 39.3 kJ/m² | 14.5 kJ/m² | 27.2 kJ/m² |
| Strength (Bending Strength – XY) | 62 MPa | 68 MPa | 120 MPa |
| Layer Strength (Bending Strength – Z) | 39 MPa | 46 MPa | 51 MPa |
| Stiffness (Bending Modulus – XY) | 1880 MPa | 2860 MPa | 3670 MPa |
| Layer Adhesion (Impact Strength – Z) | 7.4 kJ/m² | 5.3 kJ/m² | 4.1 kJ/m² |
| Heat Resistance（HDT, 0.45 MPa) | 87 °C | 99 °C | 182 °C |
| Saturated Water Absorption Rate/%（25 °C, 55% RH） | 0.65 | 0.53 | 2.56 |
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate | Engineering Plate, High Temperature Plate or Textured PEI Plate | Cool Plate |
| Hotend | Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mm | Hotend with Stainless Steel Nozzle (all size) Hotend with Hardened Steel Nozzle (0.2 mm)) |
| Glue | Bambu Liquid Glue / Glue Stick | / |
Recommended Printing Settings
Drying Settings (Blast Drying Oven): 880 °C, 8 h
Printing and Keeping Container’s Humidity: < 20% RH (Sealed, with Desiccant)
Nozzle Temperature: 240 – 270 °C
Bed Temperature (with Glue): 80 – 100 °C
Printing Speed: < 180 mm/s
Physical Properties
Density: 1.08 g/cm³
Vicat Softening Temperature: 103 °C
Heat Deflection Temperature: 99 °C
Melting Temperature: 202 °C
Melt Index: 7.56 ± 1.4 g/10 min
Mechanical Properties
Tensile Strength: 36 ± 3 MPa
Breaking Elongation Rate: 6.3% ± 1.2%
Bending Modulus: 2860 ± 130 MPa
Bending Strength: 68 ± 4 MPa
Impact Strength: 14.5 ± 1.5 kJ/m²
