Name: Bambu Lab PLA Matte 3D Printing Filament - Puzzlebox 3D Solutions
Price: 999.00 PHP
Availability: InStock

Bambu Lab PLA Matte 3D Printer Filament

Accessory Compatibility

	Recommended	Not Recommended
Build Plate	Cool Plate, High Temperature Plate or Textured PEI Plate	Engineering Plate
Hotend	All Size / Material	/
Glue	Bambu Liquid Glue Glue Stick	/

PLA Matte Hex Code Table

Color	Hex Code	Display
Ivory White	#FFFFFF
Latte Brown	#D3B7A7
Desert Tan	#E8DBB7
Ash Gray	#9B9EA0
Lilac Purple	#AE96D4
Sakura Pink	#E8AFCF
Mandarin Orange	#F99963
Lemon Yellow	#F7D959
Scarlet Red	#DE4343
Dark Red	#BB3D43
Dark Brown	#7D6556
Dark Green	#68724D
Grass Green	#61C680
Ice Blue	#A3D8E1
Marine Blue	#0078BF
Dark Blue	#042F56
Charcoal	#000000

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	55 °C，8 h
Printing and Keeping Container’s Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	190 – 230 °C
Bed Temperature (with Glue)	35 – 45 °C
Printing Speed	< 300 mm/s

Physical Properties
Density	1.31 g/cm³
Vicat Softening Temperature	63 °C
Heat Deflection Temperature	58 °C
Melting Temperature	163 °C
Melt Index	39.4 ± 3.2 g/10 min

Mechanical Properties
Tensile Strength	30 ± 5 MPa
Breaking Elongation Rate	14.8 ± 4.2 %
Bending Modulus	2360 ± 250 MPa
Bending Strength	53 ± 6 MPa
Impact Strength	19.2 ± 3.7 kJ/m²

Printing Tips

• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

Filament*1 & Desiccant*1

Print Your Own Spool Now

Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!

2.If you don’t have the spool model in your printer,

please click here to download.

Instructions for Printed Spool

When you’re finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Diameter:	1.75mm
Color:	Charcoal Black Sakura Pink Ash Gray Dark Blue Dark Brown Dark Green Dark Red Desert Tan Grass Green Ice Blue Ivory White Latte Brown Lemon Yellow Mandarin Orange Marine Blue Scarlet Red Clear

Diameter:	1.75mm
Color:	Charcoal Black Sakura Pink Ash Gray Dark Blue Dark Brown Dark Green Dark Red Desert Tan Grass Green Ice Blue Ivory White Latte Brown Lemon Yellow Mandarin Orange Marine Blue Scarlet Red Clear

Bambu Lab PLA Matte 3D Printing Filament