Bambu Lab PPS-CF Printing Guidelines:

• Nozzle Temperature: Recommended range is 310 to 340°C.
• Chamber Temperature: Recommended range is 60 to 90°C.

Tip: Using higher values within these ranges can enhance the mechanical properties of the printed parts, especially in the Z-direction.

Drying Recommendations:

Drying Temperature:

• In a blast drying oven: 100°C to 140°C for 8 to 12 hours.

On an X1 printer’s heatbed: 110°C to 120°C for 10 to 12 hours (less effective than a blast drying oven).

Important Note: Higher temperatures within the drying range yield better results, but do not exceed 160°C to avoid damaging the spool.

Storage Tips:

Storage Condition: To prevent the filament from absorbing moisture, use an airtight storage container with desiccant during printing.