Polymaker Panchroma Glow PLA

Panchroma Glow PLA displays a natural color in day light but reveal its beautiful glowing effect in the dark!
- Formerly PolyLite Glow
Note: You may still received products under PolyLite packaging. They are SIMILAR.
In Stock
Ships Tomorrow
Same Day Shipping
₱999.00
These glow in the dark materials have an additive that makes them very abrasive. This means you should not print them unless you have a hardened nozzle.
-
Due to the abrasiveness, we do not recommend printing these in an AMS with plastic gears and tubes.
-
Other than being abrasive, these materials are standard PLA options and can print with standard PLA settings.
-
Leave the cooling fan on at full blast for best surface quality.
Printing Temperature: 190˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: up to 200mm/s
Fan: ON
Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Drying Settings: 55˚C for 6h (Only if the material has absorbed moisture)