Polydissolve S2 (OLD)

Polymaker PolyDissolve S2

polymakerlogo

Polymaker PolyDissolve S2

PolyDissolve™ is a family of dissolvable support filaments. This family offers support solution for our portfolio of filaments. It enables a greater design freedom.

PolyDissolve™ S2 is a dissolvable support for PC, ABS and ASA based filaments from our portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.

Ships Tomorrow
Same Day Shipping

10,499.00

Out of stock

Polymaker PolyDissolve S2

Polymaker PolyDissolve S2

PolyDissolve™ is a family of dissolvable support filaments. This family offers support solution for our portfolio of filaments. It enables a greater design freedom.

PolyDissolve™ S2 is a dissolvable support for PC, ABS and ASA based filaments from our portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.

Ships Tomorrow
Same Day Shipping

10,499.00

Out of stock

PolyDissolve™ S2

PolyDissolve™ is a family of dissolvable support filaments. This family offers support solution for our portfolio of filaments. It enables a greater design freedom.

PolyDissolve™ S2 is a dissolvable support for PC, ABS and ASA based filaments from our portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.

 

PRINT SETTINGS:

  • Nozzle Temperature:
    230˚C – 250˚C
  • Printing Speed:
    30mm/s – 40mm/s
  • Bed Temperature:
    90˚C – 110˚C
  • Bed Surface:
    Work on most surfaces designed for high temperature materials.
  • Cooling Fan:
    OFF

Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters

 

MATERIAL COMPATIBILITIES:

PLA based material from Polymaker’s portfolio N/A

PETG based material from Polymaker’s portfolio N/A

ABS/ASA based material from Polymaker’s portfolio + +

PC based material from Polymaker’s portfolio + +

PVB based material from Polymaker’s portfolio N/A

TPU based material from Polymaker’s portfolio N/A

PA12 based material from Polymaker’s portfolio +

+ + support the model very well
+ generally support the model depending on its geometry
– generally doesn’t support the model depending on its geometry
– – do not support the model

 

NOTES:

  • Drying Settings:
    80˚C for 3h
  • Recommended Support Materials:
    N/A
  • Other:
    It is highly recommended to use the PolyBox™ when printing with PolyDissolve™ S2 and to store it in the resealable bag.
Print Setting:Nozzle Temperature230˚C – 250˚CPrinting Speed:30mm/s – 40mm/s

 

Bed Temperature:

90˚C – 110˚C

 

Bed Surface:

Work on most surfaces designed for high temperature materials.

Cooling Fan:

OFF

 

Drying Settings:

80˚C for 3h

 

Recommended Support Materials:

N/A

Other:

It is highly recommended to use the PolyBox™ when printing with PolyDissolve™ S2 and to store it in the resealable bag.

Process of Dissolving PolyDissolve™ S2 Support

1. Install water pump

2. Install water heater and temperature controller, set temperature to 70-85°C

3. Create alkaline solution, You will require an equal weight of 3D wash to PolyDissolve™ S2printed support. E.g. If you need to dissolve 100g of printed support, add 100g of 3D washto 4l of water

4. Check pH (Target 10.5)

5. Submerse parts

6. Rinse in cold water