PolyLite PLA CF

🧵 【Tangle Free & Moisture Free】 – Carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable zip lock bag with desiccant. Please make sure to NEVER let go of the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue

🛠️ 【Good Layer Adhesion & Rigidity】 – No warping, no jamming, no blobs or layer delamination issues. PolyLite PLA CF is a worry-free Carbon Fiber 3D Filament which has great bed adhesion, very consistent color and dimension accuracy

⚙ 【Printing Settings】 – Nozzle: 220˚C; Bed: 50˚C; Speed: 50mm/s 【Note – turn off the fan for the first layer for improved bed adhesion】

♻️ 【Cardboard Spool】 – Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box

⚠️ 【Important Note】 – Please install an abrasive resistant nozzle on your printer before printing with PolyLite PLA-CF such as a stainless-steel nozzle. As carbon fiber PLA filament is more sensitive to moisture, please make sure not to use it in high moisture environment and put it back to the resealable bad after use

🛡️ 【Risk Free & Lifetime Technical Support】 – We offer a full refund if our 1.75 filament PLA is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

Print settings

Nozzle Temperature: 190°C – 230°C Wear resistant nozzle required.

Build Plate Temperature: 25°C – 60°C

Build Surface Material: Compatible with most common build surfaces.

Build Surface Treatment: Apply a thin layer of PVA or PVP glue stick.

Cooling Fan: ON

Printing Speed: 30 mm/s – 70 mm/s

Recommended Support Material: Single Extrusion: Self Support Dual Extrusion: PolyDissolve™ S1 (Dissolve in tap water) PolySupport™ (Easy break-away support material)