Overview

A set of circuit boards installed on the printer’s toolhead. Please refer to the Wiki page here to check the version of your X1 Series TH board.

Installation

Before ordering the TH board or micro lidar for X1C/X1, please determine their versions to avoid the wrong version, which results in compatibility issues.

If the Micro Lidar SN starts with 00ExxA, it means that the lidar is a single red version, and the TH board should also be a single red version with a serial number SN starting with 003xxA or 003xxB.

If the Micro Lidar SN starts with 00ExxB, it means that the lidar is a dual red version, and the TH board should also be a dual red version with a serial number SN starting with 003xxC, 003xxD, or 003xxY.

Learn more about the replacement of the TH Board Set V9 (Single Red Laser) – X1 Series on Bambu Lab Wiki.

In the Box

– TH Board Set V9 (Single Red Laser)*1

– TH Board FPC Cable V9*1

– Extruder TH Board V9*1

– M1_6-4*4

– Glue*1

Compatibility

X1 and X1C (not for X1E)

Product Specifications