Ultimaker S7 Pro Bundle
Key Features:
- Set and Forget. Out of the Box
- Click and print with over 280+ material compatibility
- Materials Automatically Kept at 40% RH
- Up to 6 spools w/ Automated material handling
- Flexible PEI build sheet
- Integrated Air Manager
Ultimaker S7 Pro Bundle
Key Features:
- Set and Forget. Out of the Box
- Click and print with over 280+ material compatibility
- Materials Automatically Kept at 40% RH
- Up to 6 spools w/ Automated material handling
- Flexible PEI build sheet
- Integrated Air Manager
Unleash true 24/7 3D printing.
UltiMaker S7 Pro bundle gives you the benefit of all the uptime in the world. The S7 Pro is the newest 3D printer from Ultimaker featuring a Flexible Build sheet, Inductive Sensor, 3x the material capacity, Automated filament handling, Humidity-controlled storage.
Key Features:
- Set and Forget. Out of the Box
- Click and print with over 280+ material compatibility
- Materials Automatically Kept at 40% RH
- Up to 6 spools w/ Automated material handling
- Flexible PEI build sheet
- Integrated Air Manager
Bundle Includes:
- Ultimaker S7
- Ultimaker S7 Material Station
- Ultimaker Essentials / Personal software
More accurate inductive probing
Click and print with 280+ materials
PEI-coated flexible build plate
Integrated Air Manager
Automatic material handling
Designed to be left unattended, the Material Station allows the UltiMaker S7 to 3D print longer – day or night. Loading material into the Material Station takes seconds – not minutes. Simply open the door and drop the spool into a bay. During a print, any spool not in use can be switched out.
Hassle-free storage
Every spool is kept below 25% relative humidity, making it easy to realize more 3D printing applications with almost any combination of polymers and abrasive composites. Each of the Material Station's material bays have NFC readers and reinforced prefeeders for integration with UltiMaker Cura and Digital Factory.
Integrated Air Manager
Not only does this increase air quality peace of mind... It also boosts print quality thanks to its fully enclosed build chamber and single glass door.
Inductive sensor
Probes the build plate with less electrical noise and more accuracy. Now you can truly start a print and walk away – confident in a perfect first layer.
| Dimensions | |
|---|---|
| Build volume | 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches) |
| Assembled dimensions | W 495 x D 500 x H 1190 mm (W 19.5 x D 19.7 x H 46.9 inches) |
| Print technology | Fused Deposition Modeling (FDM) |
| Compatible filament diameter | 2.85 mm |
| Weight | 41.9 kg (92.4 lbs) |
| Maximum power output | 500 W |
| Printer properties | |
| Layer resolution | 0.25 mm nozzle: 150 – 60 micron 0.4 mm nozzle: 200 – 20 micron 0.6 mm nozzle: 300 – 20 micron 0.8 mm nozzle: 600 – 20 micron |
| XYZ resolution | 6.9, 6.9, 2.5 micron |
| Feeder type | Dual-geared feeder, reinforced for composite materials |
| Display | 4.7-inch (11.9 cm) color touchscreen |
| Print core replacement | Swappable print cores |
| Print head | Dual extrusion print head with an auto-nozzle lifting system, swappable print cores, and flood detection. |
| Nozzle diameters | 0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm |
| Operation parameters | |
| Filter technology | Replaceable EPA filter |
| Air extraction rate | 1 – 50 m³/h (35 m³/h nominal rate for most materials at 23 °C) |
| Nozzle temperature | 180 – 280 °C |
| Nozzle heat-up time | < 2 minutes |
| Operating sound | < 51 dBA |
| Build plate leveling | Advanced active leveling with more accurate inductive sensors |
| Build plate | PEI-coated flexible steel build plate |
| Build plate heat-up time | < 5 minutes (from 20 to 60 °C) |
| Operating ambient temperature | 15 – 32 °C (59 – 90 °F) |
| Non-operating temperature | 0 – 32 °C (32 – 90 °F) |
| Ecosystem | |
| Supplied free software | UltiMaker Cura – print preparation software UltiMaker Digital Factory – printer management software UltiMaker Essentials – enterprise-grade online software tools |
| Supported OS | MacOS, Windows, and Linux |
| Plugin integration | SolidWorks, Siemens NX, Autodesk Inventor |
| Supported file types | UltiMaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, GCODE.gz, UFP |
| File transfer | Wi-Fi (2.4 and 5 GHz), Ethernet, USB |
Filaments
Bambu Lab PLA Basic 3D Printer Filament, Smooth Finish, PLA 3D Printing Filament 1.75mm (Spool)
Original price was: ₱3,570.00.₱1,149.00Current price is: ₱1,149.00.
Bambu Lab ABS-GF (Glass Fiber Reinforced ABS) 3D Printer Filament 1.75mm
Original price was: ₱3,940.00.₱1,649.00Current price is: ₱1,649.00.
