Sub-Total: ₱0.00
Bambu Lab A1 3D Printer Philippines
Introducing the Bambu Lab A1, a cutting-edge 3D printer that falls within the above-average category. Boasting rapid print speeds, advanced sensors, and exceptional print quality, this machine sets a new standard in the world of 3D printing. The A1 marks Bambu’s venture into the traditional Cartesian “bedslinger” style, positioning itself as a formidable competitor against other manufacturers’ low to midrange FDM 3D printers. Elevate your printing experience with the Bambu Lab A1.
Key Features:
- Build Volume(W*D*H): 256*256*256 mm³
- Full-auto Calibration
- 4-Color Printing with AMS lite
- Under 48 dB Low Noise in Silent Mode
- Vibration and Flow Rate Compensation
New
Includes Warranty
Local Tech Support
Pre-Order
Original price was: ₱34,995.00.₱21,995.00Current price is: ₱21,995.00.
Bambu Lab A1 3D Printer Philippines
Introducing the Bambu Lab A1, a cutting-edge 3D printer that falls within the above-average category. Boasting rapid print speeds, advanced sensors, and exceptional print quality, this machine sets a new standard in the world of 3D printing. The A1 marks Bambu’s venture into the traditional Cartesian “bedslinger” style, positioning itself as a formidable competitor against other manufacturers’ low to midrange FDM 3D printers. Elevate your printing experience with the Bambu Lab A1.
Key Features:
- Build Volume(W*D*H): 256*256*256 mm³
- Full-auto Calibration
- 4-Color Printing with AMS lite
- Under 48 dB Low Noise in Silent Mode
- Vibration and Flow Rate Compensation
New
Includes Warranty
Local Technical Support
Pre-Order
Original price was: ₱34,995.00.₱21,995.00Current price is: ₱21,995.00.
Bambu Lab A1
- Full-auto Calibration
- Active Flow Rate Compensation
- 1-Clip Quick Swap Nozzle
- Active Motor Noise Cancelling
- 256*256*256 mm³ Build Volume
Active Flow Rate Compensation
The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Quick Swap Nozzle
All-new quick swap hotend design, the hotend pops in and out with just 1-Clip.
Active Motor Noise Cancelling
The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed And Quality
Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
What's in the box
| Item | Specifications | ||
|---|---|---|---|
| Body | Build Volume (W x D x H) | 256*256*256 mm³ | |
| Toolhead | Hot End | All-Metal | |
| Toolhead | Max Hot End Temperature | 300 °C | |
| Toolhead | Nozzle | Stainless Steel | |
| Toolhead | Nozzle Diameter | 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm | |
| Heatbed | Build Plate | Bambu Textured PEI Plate (Included) Bambu Smooth PEI Plate | |
| Heatbed | Max Build Plate Temperature | 100°C | |
| Speed | Max Speed of Toolhead | 500mm/s | |
| Speed | Max Acceleration of Toolhead | 10000mm/s² | |
| Supported Filament | IDEAL | PLA, PETG, TPU, PVA | |
| Supported Filament | NOT RECOMMENDED | ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer | |
| Sensors | Monitoring Camera | Low Frame Rate Camera (Up to 1080P) Timelapse Supported | |
| Sensors | Filament Run Out Sensor | YES | |
| Sensors | Filament Odometry | YES | |
| Sensors | Power Loss Recover | YES | |
| Sensors | Filament Tangle Sensor | YES | |
| Physical Dimensions | A1: Dimensions: 385*410*430 mm³ , Package size: 552*532*320 mm³ , Net weight 8.3 kg , Gross weight 11.7 kg | ||
Other 3D Printers by Bambu Lab
Bambu Lab A1 Mini 3D Printer Philippines
Original price was: ₱16,999.00.₱14,999.00Current price is: ₱14,999.00.
Bambu Lab A1 Combo 3D Printer Philippines
Original price was: ₱42,995.00.₱32,995.00Current price is: ₱32,995.00.
Bambu Lab A1 Mini Combo 3D Printer Philippines
Original price was: ₱26,999.00.₱24,995.00Current price is: ₱24,995.00.
Bambu Lab P1S Combo 3D Printer Philippines
Original price was: ₱66,995.00.₱59,999.00Current price is: ₱59,999.00.
Bambu Lab P1S 3D Printer Philippines
Original price was: ₱49,995.00.₱44,995.00Current price is: ₱44,995.00.
Bambu Lab P1P 3D Printer Philippines
Original price was: ₱42,995.00.₱32,995.00Current price is: ₱32,995.00.
Filaments
Bambu Lab PLA Basic 3D Printer Filament, Smooth Finish, PLA 3D Printing Filament 1.75mm (Spool)
Original price was: ₱3,570.00.₱1,149.00Current price is: ₱1,149.00.
Bambu Lab ABS-GF (Glass Fiber Reinforced ABS) 3D Printer Filament 1.75mm
Original price was: ₱3,940.00.₱1,649.00Current price is: ₱1,649.00.
