Polymaker PolyMide™ CoPa Filament

PolyMide™ is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing.

PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.

PolyMide™ CoPA features Polymaker’s Warp-Free™ technology:

Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.

Printing Properties:

• Nozzle Temperature:
  250˚C – 270˚C
• Printing Speed:
  30mm/s – 50mm/s
• Bed Temperature:
  25˚C – 50˚C
• Bed Surface:
  Glass with glue
• Cooling Fan:
  OFF

Printing conditions may vary with different printers and nozzle diameters

Mechanical Properties:

• Young’s Modulus:
  2223 ± 199 Mpa
• Tensile Strength:
  66.2 ± 0.9 Mpa
• Bending Strength:
  97.0 ± 1.1 Mpa
• Charpy Impact Strength:
  9.6 ± 1.4 kJ/m2

Thermal Properties:

• Glass Transition Temperature:
  67˚C
• Vicat Softening Temperature:
  180˚C
• Melting Temperature:
  190˚C

Notes:

• Drying Settings:
  80˚C for 12h
• Recommended Support Materials:
  PolyDissolve™ S1

Other:

It is highly recommended to use the PolyBox™ when printing with PolyMide™ CoPA and to store it in the resealable bag.

To ensure a good heat resistance of your printed part it is recommended to anneal your PolyMide™ CoPA 3d printed model.

Annealing settings: 70˚C for 2h

When used extensively, PolyMide CoPA can be abrasive to brass nozzles. When using PolyMide CoPA, we recommend to switch to a wear resistant nozzle such as hardened steel nozzle.

TDS:

DOWNLOAD

SDS:

DOWNLOAD

PIS:

DOWNLOAD